Products :: image loudspeakers :: HiFi Speakers Home Theatre Subwoofers Auckland New Zealand

SUB10 ACTIVE SUBWOOFER

The Image sub10 active subwoofer is optimised to reproduce the lowest octaves accurately and blend seamlessly with Image floor standing and bookshelf models. With more than 200 watts RMS available there is more than enough power for any domestic application.

The system employs a passive radiator (opposite the motorised driver) that has a critical mass to control driver movement at resonance and then extend the bass response below audibility.

The unique characteristics of the Image subwoofer driver allows it to be used in small enclosures, producing controlled extension in your listening room to 25Hz and below. It will fulfil every demand for deep clean bass reproduction from the latest digital surround sound sources and will also be totally at home in the most demanding High-end audio system.

The sub10 is suitable for both small to larger rooms. For the ultimate system, consider using one sub10 each channel to partner your main speakers.

Wiring the subwoofer to your system is very easy and you can choose high level (speaker) or low level (RCA) inputs.

Facilities include:

Active and variable Low pass crossover from 50-100Hz to add the lowest octaves seamlessly to your main speakers

Variable subwoofer amplifier gain (volume) control to match the subwoofer output to your main speakers

Crossover on/off switch so you can choose to use the crossover within a surround sound processor rather than the crossover within the Image sub10

Phase reverse switch to align your main speaker phase with the subwoofer driver

Auto Standby that deactivates the amplifier to save power when no signal is present

Thermal overload protection to prevent the subwoofer amplifier overheating if overpowered

Gold plated input and output connectors for perfect signal transfer.

SPECIFICATIONS SUB10

Driver:

Long throw, 26cm Composite cone

Passive Radiator:

Long throw, 26cm Composite cone

Room Response:

25Hz-100Hz

System type:

200 watt RMS, totally active, using Discrete High current driver and output devices

THD:

0.03%

S/N ratio:

95dB (at rated power)

Input sensitivity:
(at 100Hz)

Low level input - 75mV
High level input - 3.5V

Input impedance:

22k ohms

Dimensions(cm):

38 x 34 x 34 (h x w x d)

Facilities:

LED power indicator.
Master power switch.
Active and variable Low pass crossover control from 50-100Hz at 12dB/octave.
Variable low frequency amplifier gain control.
Crossover bypass switch.
Phase reverse switch.
Auto power on/off activated by input signal.
Thermal overload protection circuit.
Gold plated RCA (low level) input and output terminals.
Gold plated multi-way speaker (high level) input and output terminals.
Image solid brass adjustable floor spikes.

Sub10 Brochure Information (750K)