 |
 |
back |
|
|
|||
A Fine ImageA Speaker With More Than Looks By Michael Jones
A deserved success in the New Zealand hi-fi scene has been Chris Ball's Image range of loudspeakers. Manufactured in Auckland, the Image range has succeeded because of a combination of very good sound with great real wood veneer finishes, all at some very competitive prices. Here I'm looking at the model 402. It's a slim floorstander which will fit easily into small and medium sized rooms. Technically the Image 402 is a two-way speaker with a rear port for bass loading. As with most of the Image range, the drive units used are from Morel. The tweeter, handling the higher frequencies, is a 28mm soft dome. The bass/midrange driver is also from Morel and has some very nice characteristics. The 160mm (six inch) cone is a damped polymer cone (basically, a type of plastic) but has a massive three inch voice coil. This is much larger than most other drive units available. Image say that the position of the voice coil allows for a much more rigid cone, while better mechanical integrity is available because the cone and dust cap (the centre piece) are moulded in one piece. Some speakers come with an option of adding sand or other weighty material to a cavity in the bottom of the speaker. The idea here is to lower the centre of gravity of the speaker (often most of the weight is at the top, from the drive units), thus making the speaker more stable. According to Image the major benefit though is that the sand helps damp resonances set up in the cabinet. The 402 doesn't offer this option; instead the sand is already in the bottom of the speaker. And not loosely packed either. Chris Ball (Image Loudspeaker supremo) places sand in the bottom cavity and compresses the sand for maximum benefit. This is a better way of filling the speaker, but it does increase the Image freight bills! While it's true to say that part of the initial attraction of an Image speaker is the beautiful wood finishes, it's the sound that clinches the purchase. The 402 has a sensitivity rating of 88dB and is recommended for use with an amplifier of between 40 and 150 watts. The 402 comes with spikes and is bi-wirable.
Sound of Image There's always been something about a well-designed six-inch two-way loudspeaker that communicates with me. Sure, such a speaker won't flap your trousers with large levels of low bass, but that's not what music is about anyway. With its extra bass unit, the 404 can produce higher levels of bass. It also has greater dynamic swings and a more potent feel to the sound. Most of the music lies in the midrange and it is here that the 402 excels. There's an exquisite sense of detail that emerges from the speakers. Part of the attraction of the current range of Image Loudspeakers is the way that they can swing dynamics. I'm not talking here of extremes of loudness, but rather the dynamic shadings that help make the music come alive. The Image 402 makes many speakers sound somewhat compressed, while the 402 opens up with dynamic impact. Some of the above comments may give the impression that the 402 is a bit of a wimp. Not so! The 402 goes to loud levels in a typical New Zealand lounge. The bass is articulate with plenty of power for reproducing the bass guitar. Sure, it won't threaten your foundations, but if that's what you're after then you're looking at the wrong speaker. Conclusion Another winner from Image Loudspeakers. The 402 particularly suits small to medium rooms and produces a wonderfully balanced, musically enjoyable sound. |
|||||
 |
|||||
|
|||||
|
|||||
| © copyright 2002 i m a g e LOUDSPEAKERS | |||||
| back |
Image Loudspeakers ltd is the manufacturer and distributor of IMAGE LOUDSPEAKER SYSTEMS. 21 Eric Paton Way, Mt. Wellington, Auckland, New Zealand. Phone: ++64 9 570 8090. Fax: ++64 9 520 6229 Email: |